Custom Monitors Pay Attention To Maintaining Humidity

Generally, if the humidity is maintained between 30%-80%, the customized display can work normally, but once the indoor humidity is higher than 80%, condensation will occur inside the customized display. The internal power transformer and other coils are also prone to leakage when damp, and may even cause a short circuit; the high-voltage parts of the customized display are prone to discharge; the internal components are easy to rust and corrode, which may cause The circuit board has a short circuit. Buna görə də, customized LCD monitors must be protected from moisture. Custom monitors that are not used for a long time can be energized for a period of time, so that the heat generated by the customized monitor will drive out the moisture in the machine.

Clean the display surface properly

If you find stains on the surface of the display, you can wipe it off with a soft cloth slightly moistened with water. Do not sprinkle water directly on the surface of the display to prevent water from entering the LCD and causing the screen to short-circuit.

Avoid shock

LCD screens are very fragile, so avoid strong shocks and vibrations. LCD contains many glass and sensitive electrical components. Falling on the floor or other similar strong blows will cause damage to the LCD screen and other units. Be careful not to put pressure on the LCD display surface.